Controller pellet stove water jacket with touch screen display
V6T-2 - water jacket pellet stove controller detecting the burning fire by measuring the temperature of the exhaust gases and with temperature control up to 85°C
Mechanisms and sensors connected to NPBC-V6Т:
- Electric feed screw motor to transfer the fuel from the bunker to the burner (power up to 180W)
- Electric internal auger motor to forward the fuel to the burning chamber (power up to 180W)
- Main fan with smooth speed control to regulate the air flow to the burning chamber (power up to 180W)
- Additional cleaning fan (power up to 900W)
- Exhaust gases fan with smooth speed control (power up to 180W)
- Heating element to fire the pellets (power up to 800W)
- Hot water heater circulation pump (power up to 180W)
- Central heating installation circulation pump (power up to 180W)
- Photo sensor to detect the burning fire ( only for NPBC-V6T-1)
- Thermostat to control the back burning
- Temperature sensor to control the temperature of the water in the boiler
- Temperature sensor for the temperature of the hot water heater
- High temperature sensor pt100 for the temperature of the exhaust gases
- A potential free socket of a room thermostat for better control of the burning process according to the room temperature.
- A potential free socket for an forced switch on/ off of the burner
- Micro USB Interface for connection with a computer to upgrade the software
- A possibility to install an optional analog output 0-10V, designed to control a frequency inverter for a powerful three- phase air fan.
- A possibility for second Control module as room thermostat function NRC8-SV or NRC6-SV
- The controller has a universal power supply, thanks to which it can be used in countries with a 110V/ 60 Hz power supply network