V6T-2 - water jacket pellet stove controller detecting the burning fire by measuring the temperature of the exhaust gases and with temperature control up to 85°C
Mechanisms and sensors connected to NPBC-V6Т:
-
Electric feed screw motor to transfer the fuel from the bunker to the burner (power up to 180W)
-
Electric internal auger motor to forward the fuel to the burning chamber (power up to 180W)
-
Main fan with smooth speed control to regulate the air flow to the burning chamber (power up to 180W)
-
Additional cleaning fan (power up to 900W)
-
Exhaust gases fan with smooth speed control (power up to 180W)
-
Heating element to fire the pellets (power up to 800W)
-
Hot water heater circulation pump (power up to 180W)
-
Central heating installation circulation pump (power up to 180W)
-
Photo sensor to detect the burning fire ( only for NPBC-V6T-1)
-
Thermostat to control the back burning
-
Temperature sensor to control the temperature of the water in the boiler
-
Temperature sensor for the temperature of the hot water heater
-
High temperature sensor pt100 for the temperature of the exhaust gases
-
A potential free socket of a room thermostat for better control of the burning process according to the room temperature.
-
A potential free socket for an forced switch on/ off of the burner
-
Micro USB Interface for connection with a computer to upgrade the software
-
A possibility to install an optional analog output 0-10V, designed to control a frequency inverter for a powerful three- phase air fan.
-
A possibility for second Control module as room thermostat function NRC8-SV or NRC6-SV
-
The controller has a universal power supply, thanks to which it can be used in countries with a 110V/ 60 Hz power supply network
